SCIENTIFIC AND INDUSTRIAL TESTING AND RESEARCH CENTRE
Promoted by SIEMA & CODISSIA and Supported by COINDIA
 
 
CHEMISTRY  DIVISION 
Wet Analysis Instrumental Analysis NABL
Analysis of Ferrous and Non-Ferrous alloys are carried out as per National / customer’s specification / Instrumental methods as required.

All types of water testing are conducted by APHA Method / National Standards.

Analysis of Ferro Alloys like, Ferro silicon, Ferro chromium, Silico Manganese, Ferro Manganese by Instrumental method and customer’s specification as required. Also analysis of coal and coke as per National methods.
We delivery the Results with in a hour of receiving the sample.
 
 
 
Carbon – Sulphur Rapid Analyser
Make: KSM, Chennai
Model: Strohlein type.
Range: From 0.001%.
Accuracy: ± 0.01%.
To test Carbon and sulphur in ferrous and non ferrous alloys.
Testing of Carbon & Sulphur in Coal & coke.
Steels (stainless steel, mild steel and all grades of steels)
Elements : Carbon, sulphur, Silicon, Phosphorous, manganese, chromium, nickel, iron, molybdenum, copper, cobalt, etc.,
Quantity : Minimum 10 gms needed. As per IS : 228 and Using atomic absorption spectrophotometer
CAST IRON: ( All types of cast iron )
Elements : Carbon, sulphur, Silicon, Phosphorous, manganese, chromium, nickel, iron, magnesium, copper, etc.,
Quantity : Minimum 10 gms needed. As per IS : 12308 and Using atomic absorption spectrophotometer
COPPER ALLOYS : ( brass, bronze, Gunmetal, etc., )
Elements : Copper, lead, tin, zinc, iron, nickel, antimony, Silver, phosphorous, silicon, manganese, etc.,
Quantity : Minimum 10 gms needed. As per IS : 4027,440 and 7212 and Using atomic absorption spectrophotometer
ALUMINIUM BASE ALLOYS ( All types aluminium alloys )
Elements : Aluminium, Magnesium, manganese, Silicon, nickel, copper, lead, zinc, iron, chromium, etc.,
Quantity : Minimum 10 gms needed. As per IS : 504 and Using atomic absorption spectrophotometer
FERRO ALLOYS: ( Ferro silicon, Ferro Manganese, Ferro Chromium, Silico manganese , Ferro nickel.. etc )
Elements : Carbon, Sulphur , Phosphorous ,Chromium Manganese, molybdenum, nickel, etc.,
Quantity : Minimum 10 gms needed. As per IS : 1559 and Using atomic absorption spectrophotometer
COBOLT AND NICKEL BASE ( Carbon, sulphur, Silicon, Phosphorous, )
Elements : Carbon, Sulphur , Phosphorous ,Chromium, Manganese, chromium, nickel, iron, molybdenum, copper, cobalt, etc.,
Quantity : Minimum 10 gms needed. Using atomic absorption spectrophotometer
COAL AND COKE: ( Proximate Analysis As per IS : 1350 )
Elements : Moisture, Volatile matter, ash, fixed carbon, sulphur
WATER ANALYSIS
All types of water As per APHA & IS methods pH value, TDS, TSS, Total Solids, total hardness, chlorides, sulphates, alkalinity, silica and all heavy metals like, Pb, Cu, Fe, Zn, Mn, Cr, Ni, etc and Minerals like Ca, Mg, Na, K, etc.,